FM Shortwave 2x Telescopic Antennas
FM Shortwave 2x Telescopic Antennas
RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio with 2x Telescopic Antennas
FM Shortwave 2x Telescopic Antennas
-
Includes 1x RTL-SDR Blog brand R820T2 RTL2832U 1PPM TCXO HF Bias
Tee SMA Dongle (V3), 1x portable multipurpose dipole antenna set. Dipole
set includes 1x dipole base with 60cm RG174, 2x 23cm to 1m telescopic
antenna, 2x 5cm to 13cm telescopic antenna, 1x 3m RG173 extension cable,
1x flex tripod mount, 1x suction cup mount.
-
Great for many applications including general radio scanning, air
traffic control, public safety radio, ADSB, AIS, ACARS, trunked radio,
P25 digital voice, POCSAG, weather balloons, APRS, NOAA APT weather
satellites, radio astronomy, meteor scatter monitoring, DAB, or for use
as a low cost panadapter with a traditional ham radio.
-
Several improvements over generic brands including use of the
R820T2 tuner, improved component tolerances, a 1 PPM temperature
compensated oscillator (TCXO), SMA F connector, aluminium shielded case
with thermal pad for passive cooling, activatable bias tee circuit and a
much improved antenna set.
-
Can tune from 500 kHz to 1.8 GHz and has up to 3.2 MHz of
instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in
direct sampling mode).
-
The multipurpose portable dipole kit is great for beginners! Use
it either for terrestrial or satellite reception just by changing the
orientation of the antenna. The mounts and extension cable allow you to
temporarily place the antenna outside for improved reception.
FM Shortwave 2x Telescopic Antennas
Quickstart Guide: rtl-sdr.com/QSG
V3 Features Guide: rtl-sdr.com/V3
Antenna Guide: rtl-sdr.com/DIPOLE
This is an RTL-SDR software defined radio receiver with RTL2832U ADC
chip, R820T2 tuner, 1PPM TCXO, SMA F connector and aluminium case with
passive cooling. Tunes from 500 kHz to 1.8 GHz with up to 3.2 MHz (2.4
MHz stable) of instantaneous bandwidth. (HF works in direct sampling
mode). Perfect for use as a computer based radio scanner with free
software like SDR#, HDSDR, SDR-Radio, GQRX or SDR Touch on Android.
Works on Windows, MacOS, Linux, Android and single board computers like
the Raspberry Pi.
FM Shortwave 2x Telescopic Antennas
Great for many applications including general radio scanning, air
traffic control, public safety, ADS-B aircraft radar, marine AIS, ACARS,
trunked radio, P25/MotoTRBO digital voice, POCSAG, weather balloons,
APRS, NOAA APT/Meteor M2 weather satellites, radio astronomy, DAB, or as
a low cost panadapter with a standard ham radio.
As of Sept 28
now comes with a dipole antenna kit which is perfect for beginners. The
short antennas are great for ADS-B, and the longer antennas work well
at lower frequencies. When used in a v-dipole configuration the antenna
works well for 137 MHz weather satellites and the ISS. Use in a vertical
configuration for terrestrial signals. The two mounts and 3m of RG174
cable allow you to easily mount the antenna outdoors.
FM Shortwave 2x Telescopic Antennas
This model has several improvements over other models. It uses the
improved R820T2 tuner, a 1PPM TCXO, has better components, a redesigned
PCB, cooling improvements, extra ESD protection and an SMA F connector.
It also has a software activatable bias-tee for powering devices such as
LNA's and active antennas. Full info available on the improvements
available here goo.gl/JTNPrb
Requires USB 2.0 or newer.
Quickstart Guide: rtl-sdr.com/QSG, V3 features guide: rtl-sdr/v3, dipole
antenna guide: rtl-sdr.com/dipole. Please feel free to contact us for
support.
GO TO STORE
FM Shortwave 2x Telescopic Antennas
